Upstream and Downstream Oil and Gas Servicing Company Recruitment

Upstream & Downstream Oil and Gas Servicing Company in Nigeria latest job recruitment. Applications are invited from suitably qualified candidates for full employment into the vacant positions below at the Upstream and Downstream Oil and Gas Servicing Company.

Upstream & Downstream Oil and Gas Servicing Company Jobs

The Upstream & Downstream Oil and Gas Servicing Company Jobs.

  1. Shutdown Superintendent (Spading/Despading)
  2. Shutdown Superintendent (Heat Exchangers)
  3. Shutdown Engineer
  4.  Shutdown Team Supervisor
  5. Shutdown Fabrication Supervisor
  6. Shutdown Supervisor (Separator Works)
  7. Shutdown Supervisor (Scrubber Works)
  8. Shutdown Superintendent
  9. Construction Superintendent
  10.  Project Manager
  11. Hydrotest Precommissioning Specialist
  12. Shutdown Supervisor (Heat Exchanger)
  13. Shutdown Supervisor (Vessel Drum)
  14. Shutdown Supervisor (Valve Replacement)
  15. Supervisor, Survey Modification & Record (SMR)
  16. Shutdown Superintendent (Valves Replacement)

Requirements:

Construction Superintendent

  • Must possess an engineering or technical degree from an accredited & recognized institution plus 15 years or more experience (20 years’ experience without an engineering/technical degree) in directing field construction and shop fabrication for major projects in the oil, gas, and/or petrochemical industries.
  • Must have a minimum of 5 years’ experience as a Construction Superintendent in planning and supervising offshore construction work such as installation of platform facilities, hook-up and commissioning and pipeline construction and commissioning.
  • Must have good leadership and inter-personal skills, planning, work prioritization and understanding of offshore construction work requirements and be able to work closely with Company’s representatives and Operations staff to ensure a smooth work execution and turnover when installation is complete
  • Must possess the relevant HSE experience
  • Familiar with and knowledge of the general specifications and procedures of a company.

 Project Manager

  • Minimum of 15 years of project management experience on oil and gas installations out of which 5 or more years must be in the current position of a Project Manager.
  • Able to manage Contractors engineering resources
  • Must be able to serve as the primary liaison to contractor’s home office engineering staff for additional work requests.
  • Must have in-depth experience of managing all aspects of engineering design and/or construction projects for the oil, gas, and petrochemical industries.
  • Skilled in planning and scheduling techniques
  • Skilled in coordinating mobilisation of all resources, monitoring progress against agreed schedules, ability to analyse gaps and recommend corrective actions and ensure compliance to clients’ requirements.
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must be educated to degree level obtained from an accredited and recognised institution.
  • Must possess an Engineering or Technical degree from a recognised institution
  • Must have COREN certification or equivalent professional engineer certification.

Hydrotest Precommissioning Specialist

  • Minimum of 10 – 15 years of relevant hydrotest precommissioning specialist experience in oil and gas installations.
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must be able to work under SIMOPS conditions
  • Must possess a Bachelors degree in Mechanical, Chemical, Petroleum Engineering or other related Engineering field with experience of piping and structural shutdown activities.

Shutdown Supervisor (Heat Exchanger)

  • Mimimum of 6 years of relevant offshore SHUTDOWN experience of heat exchange maintenance.
  • Highly skilled in conducting performance evaluation, monitoring and trouble shooting of heat exchangers
  • Highly skilled in performing repairs of metallurgical defects and modifications
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors degree in Mechanical, Metallurgical Engineering or other related Engineering field with experience of heat

Shutdown Supervisor (Vessel Drum)

  • Minimum of 6 years of relevant offshore SHUTDOWN experience of spading, despading and vessel drum activities on oil and gas installations.
  • Highly skilled in performing draining of hydrocarbon products, water flushing, N2 purging, LEL check, etc
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors degree in Mechanical, Chemical, Petroleum Engineering or other related Engineering field with experience of piping and structural shutdown activities.

Shutdown Supervisor (Valve Replacement)

  • Mimimum of 6 years of relevant offshore SHUTDOWN experience of valves replacement, spading and despading activities on oil and gas installations.
  • Highly skilled in performing positive isolation on joints and following intrusive inspection; despading of disturbed joints; flange management of ASME flanges including performing machining on the face of the flange for damaged flanges.
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors degree in Mechanical, Chemical, Petroleum Engineering or other related Engineering field with experience of piping and structural shutdown activities.

Supervisor, Survey Modification & Record (SMR)

  • Mimimum of 6 years of relevant SMR offshore experience during SHUTDOWN activities on oil and gas installations.
  • Must possess experience of preparation of SMR documents; Carrying out survey’s and inspections of oil installation, equipment and materials; Identification of equipment replacement, modifications and repairs to be carried out.
  • Highly skilled in performing site survey’s to check the condition of the flanges and the bolts within the Full Field Shutdown scope of works
  • Validate the condition of equipment and valve replacement list and develop replacement plan
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors Degree in Mechanical Engineering or other related Engineering field with experience of piping and structural

Shutdown Superintendent (Valves Replacement)

  • Minimum of 8 years of relevant offshore SHUTDOWN experience of valves replacement, spading and despading activities on oil and gas installations.
  • Able to supervise and manage Spading/Despading valve replacement Supervisors. 
  • Highly skilled in performing positive isolation on joints and following intrusive inspection; despading of disturbed joints; flange management of ASME flanges including performing machining on the face of the flange for damaged flanges, bolt tightening/ torqueing on the joints, tagging of joints, installation of blind flange or blind hub, corrective maintenance to replace defective valve and equipment e.t.c.
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors degree in Mechanical, Chemical, Petroleum Engineering or other related  Engineering field with experience of piping and structural shutdown activities
  • Relevant professsional certifications is a plus.

Shutdown Superintendent (Spading/Despading)

  • Minimum of 8 years of relevant offshore SHUTDOWN experience of spading/despading vessel open and close activities on oil and gas installations.
  • Highly skilled in performing draining of hydrocarbon products, water flushing, N2 purging, LEL check, bolt tightening/ torqueing on the joints, tagging of joints, de-spading of disturbed joints etc
  • Able to supervise and manage Spading/Despading Supervisors and an offshore shutdown team of a minimum of 20 persons.
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess Bachelors degree in Mechanical, Chemical, Petroleum Engineering or other related  Engineering field with experience of piping and structural shutdown activities
  • Relevant professsional certifications is a plus.

Shutdown Superintendent (Heat Exchangers)

  • Minimum of 8 years of relevant offshore SHUTDOWN experience on oil and gas installations
  • Highly skilled in conducting performance evaluation, monitoring and trouble shooting of heat exchangers
  • Highly skilled in performing repairs of metallurgical defects and modifications
  • Able to supervise and manage Heat Exchanger Supervisors
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors degree in Mechanical, Metallurgical Engineering or other related Engineering field with experience of heat exchange maintenance.
  • Relevant professsional certifications are a plus.

Shutdown Engineer

  • Minimum of 5 – 10 years of relevant offshore SHUTDOWN experience on oil and gas installations.
  • Skilled in planning and scheduling techniques
  • Skilled in developing shutdown scope of work, coordinating mobilisation of all shutdown resources, monitoring shutdown progress against agreed schedules, ability to analyse gaps and recommend corrective actions and ensure compliance to clients requirements.
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must possess a Bachelors degree in Mechanical Engineering or other related Engineering field.
  • Relevant professional certification is a plus

 Shutdown Team Supervisor

  • Mimimum of 10 years of relevant offshore SHUTDOWN and/or offshore hook-up activities
  • Ability to:
    • Report on shutdown activities
    • Forecast the activities for the coming week
    • Be pro-active on the work
  • Experience in acknowledgement of Vessels, Exchangers, column inspection work, torquing and bolt tensionning
  • Able to work in fast track conditions
  • Able to manage a team of 20 workers.
  • Must be able to work under SIMOPS conditions
  • Must possess the relevant HSE experience
  • Familiar with and knowledge of the general specifications and procedures of a company.

Shutdown Fabrication Supervisor

  • Mimimum of 15 years of relevant offshore SHUTDOWN construction piping fabrication experience  and offshore hook-up activities
  • Highly skilled with the knowledge of the general specifications and structural standards with in-depth knowledge of heavy lifting.
  • Must possess the relevant HSE experience
  • Experience in torquing and bolt welding, installation piping and structure, torquing and bolt tensionning, ,
  • Able to work in fast track conditions.
  • Must be able to work under SIMOPS conditions
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Able to manage a team of 20 workers (fitter, welders riggers, erectors e.t.c)

Shutdown Supervisor (Separator Works)

  • Minimum of 10 years experience in carrying out separator works during Shutdown or offshore hook-up activities.
  • Highly skilled in performing Separator works.
  • Able to lead in the preparation of baffles.
  • Must be able to work under SIMOPS conditions.
  • Familiar with and knowledge of the general specifications and procedures of a company.
  • Must be able to manage a team of 20 workers.

Shutdown Supervisor (Scrubber Works)

  • Minimum of 10 years of relevant offshore SHUTDOWN experience of Scrubber activities on oil and gas installations.

Ability to:

  • Lead scrubber and inspection works during shutdown.
  • Lead preparation of baffles.
  • Manage an offshore team of 20 shutdown scrubber personnel.
  • Must be able to work under SIMOPS conditions.
  • Familiar with and knowledge of the general specifications and procedures of a company.

Shutdown Superintendent

  • Level of Construction Manager, familiar with shutdown activities such as inspection of exchangers, vessels, column. Acknowledgement of piping, boilermaking, structural work and lifting as per the Company’s general specifications.
  • An HSE culture will be added advantage.
  • Able to work under stress with an experience of 10 years in the same area, shutdown or hook up activities in an offshore location.
  • Must be able to work under SIMOPS conditions.
  • Familiar with and knowledge of the general specifications and procedures of a company.

How to Apply:

Interested and qualified candidates should forward their CV’s, copies of relevant degree qualifications, certificates and a Cover Letter to support their Application to: [email protected] or [email protected]

Note

  • Please indicate the job position and the reference code you are applying for in the subject box of the email.
  • Any applications sent after this time and date will not be accepted.
  • Only short-listed candidates will be contacted.

Apply Before: 10pm; 20th June, 2018.

About the Upstream & Downstream Oil and Gas Servicing Company. 

Taris Consulting – Our client, an Upstream & Downstream Oil and Gas Servicing Company with an established facility for the fabrication and construction of various equipment for Oil and Gas Installations, seeks to recruit highly competent, experienced and suitably qualified Nigerians to perform Full Field Shutdown activities located offshore Nigeria.

The Shutdown is for the purpose of performing intrusive inspections on Pressure Vessels and Heat Exchangers, and also preventative and corrective maintenance (replacement of defective valves, replacement of sectional piping by welding/flange connection and execution/tie-in of various Site Modifications including electrical and instrumentation which require Full Field Shutdown).


PLEASE help others by Sharing This Job Opportunity on:

Over 200,000 + Readers

Get fresh content from MyschoolGist

Related Posts:

Leave a Reply